24Use the pencil to draw the boundaries of the button\^OK
54Point and click inside the graphic associated with the button (this may take a minute).\^OK
44Use the lasso to encircle the graphic associated with the button\^OK
44The button you defined was too small.\^Try Again\Cancel
44Your button's shape has been defined\^OK\Try Again
44This NBA requires parameters.
Please enter parameters before exiting.\^OK
44There is already a sound with that name. Do you want to replace it?\^Replace\Cancel
34Cannot edit a locked item,
do you wish to unlock it?\^Yes\No
54This card is currently locked and cannot be edited. Do you wish to unlock this card?\^Yes\No
34This button needs a shape, would you like to give it one now?\^Yes\No
54This stack must be saved before continuing.\^Save\Cancel
24Error in loading animation.\^OK
34Unable to complete this button.
The disk was locked.\^OK
34Unable to complete this button.
The disk was full.\^OK
44There are buttons connected to this card.
Do you want to delete them also?\^Cancel\No \Yes
54Before this step can be completed this stack must be named and saved.\^Give stack a name\Cancel Operation
44You are about to delete an entire card, are you sure this is what you want to do?\^No\Yes
54This disk/file is locked.
Unable to save important information.
Please unlock disk/file and click 'OK'\^OK\Cancel
74This stack cannot be loaded by this version of HyperStudio.
Contact Roger Wagner Publishing for update information.\^OK
33A fatal memory error occurred, program must terminate.\^Sorry
24Sorry, I can't find that card.\^OK
34Not enough memory available to complete this operation.\^OK
44HyperStudio is running very low on memory.\^OK
44Network version of HyperStudio is required.\^OK
24HyperStudio cannot read this kind of TIFF file.\^OK
24Unable to read this TIFF file.\^OK
03This stack was changed, do you want to save it?\^Save\Cancel\Don't Save
34Not enough memory to save this background.\^OK
44Sorry, this field is full. Text fields can only hold about 30,000 characters.\^OK
44Sorry, there are no icons in this file,
try another.\^OK
44Sorry, there are no icons in this file,
try another.\^OK
44Sorry, there are no sounds in this file,
try another.\^OK
44Sorry, some kind of error has occurred.\^OK
74I’m having trouble reading the sounds and icons from this stack. The stack may load but without sounds and icons.\^Continue
44An error has occurred during printing.\^OK
64HyperStudio is running very low on memory,
some new edited text may have been lost on this,
or the last viewed card.\^OK
54Some kind of error has prevented HyperStudio from saving this graphic file.\^OK
54This picture is a different size than the card,
do you want it to re-sized so that it fits?\^Yes\No
44Sorry, there are no NBAs in this file,
try another.\^OK
44Sorry, I haven't seen any marked cards yet.\^OK
54Because we were unable to return to this button's original stack it must be canceled.\^OK
44Sorry, I can only convert stacks created with HyperStudio version 3.0 or later.\^OK
44Sorry, I can't run this QuickTime movie, you don't have QuickTime.\^OK
04Would you like to get the picture from a disk file or the video digitizer?\^ Disk file \Cancel\Video
53Not enough memory to make this command undoable, do you wish to continue anyway?\^Yes\No
54I could not find a video source, if you want to try again you must hold down the option key.\^OK
04A movie or video already exists on this card.
Do you want to delete or edit it?\^Edit\Delete \Cancel
44Your button's shape has been defined.\^OK\Try Again
44The button you defined was too small.\^Try Again\Cancel
44You did not enter a valid name, please try again.\^OK
74You did not enter a valid serial number, please try again.
Serial numbers contain 15 characters.
You can use the tab key to move to the serial number field.\^OK
43Unable to save user information.
Please make sure the disk is online and unlocked\^OK
04This card is currently locked and can't be edited.
Do you want to unlock it?\^Yes\No
03HyperStudio is running very low on memory.
You should save any changes and restart HyperStudio.\^OK
04There is not enough memory to change to that many colors.\^OK
64Hello\Hi
64Hello\^Hi
74I couldn't save a faster version because of a file error. Please find a place to save this new file.\^OK\Cancel
34This button needs a shape, please give it one now.\^OK
44Sorry, there isn't enough space left on
this disk to save this file.\^OK
34Sorry, I can't save the file because this disk is locked.\^OK
64Sorry, no more cards can be added because this is the preview version of HyperStudio.
Contact Roger Wagner Publishing at 1-800-HYPERSTUDIO for ordering information\^OK
83The stack you are about to save is only one card from the Tip of the Day! stack. You probably do not want to save it over your Tip of the Day! stack. You can cancel now or go on and give the stack a name (you can cancel there also).\^Cancel\Continue
24I'm sorry, I can't load this file because it is not a stack.\^OK
53Alas, poor HyperStudio I knew him well.
Sorry, HyperStudio could not get enough
memory to display a card, and so must quit.\^Anon
03HyperStudio no longer has enough memory to undo painting, delete painted text, or save changes to backgrounds.\^OK
21Sorry, HyperStudio needs system 6.0.7 or better to run.\^OK
04Because of the error, HyperStudio was not able to load the entire stack. The stack's name was changed.\^OK
24The digitizer is not responding, please check the setup.\^OK
04Sorry, you can't change white or black.\^OK
04This movie doesn't contain any pictures.
It probably has some sound in it, which will play when your button is clicked.\^OK
84\^OK
74I'm sorry, I can't currently convert GS stacks on black and white machines. If you can, convert and save the stack on a color machine, then load it with this machine\^OK
54I'm unable to find the LaserDisc Player, please:
- Check player power and connections.
- Turn off internal/Express modem.
- Check player for disc.\^Try Again\Continue\Cancel
84I've found a bad value in the current stack. If you are working on this stack you should save it to a new name and then reload it. If this error occurs again, you might want to delete the card that causes this error and recreate it.\^OK
74You've just created a new stack, it is called "Untitled" and you are on the first card. You can now paint with the paint tools, add buttons and use "New Card" to add more cards.
\^OK
04The file you chose is already in use, so I could not open it.\^OK
64This is a group card, erasing the background on this card will also erase the background on other cards in the group.
You could instead ungroup the card and then erase it.\^Ungroup and Erase\ Erase All \Cancel
64We hope you've enjoyed exploring HyperStudio.
The evaluation period for this copy has expired.
Please contact Roger Wagner Publishing to obtain a standard copy of HyperStudio.\^OK
04It appears that the stack has become damaged. If you've made changes then you should save the stack to a new name, then try to reload it.\^OK
64The image you are working with has become damaged. If you've made changes then you should save the stack to a new name, then quit HyperStudio and try again.\^OK
34Sorry, there was problem opening the QuickTime movie.\^OK
04This item is currently locked and can't be edited.
Do you want to unlock it?\^Yes\No
04If you make this field transparent then it can't have a scroll bar or be scrollable\^OK\Cancel
64Magic buttons are not currently on. You normally turn them on using the "Preferences" option under the Apple menu,
but, if you like, I can turn them on for you right now.\^OK, turn them on\Don't turn them on now
64You’ll lose all text contained in this field from other cards if you make this field a non-group item.
Are you sure you want to do this?\^Yes, ungroup it\No
04The video digitizer does not work with your monitor or its current setting. You might need to change to a stack with more colors.\^OK
44System 7 is required to launch documents with HyperStudio.\^OK
04Do you want to add a laserdisc sequence,
a live video window or a QuickTime movie?\^QuickTime movie\live video \Laserdisc
74In your new stack do you want the same card size
and number of colors as in the current stack?\^Yes\No
24Sorry, your card size must be at least 40 wide and 40 high\^OK
84The card size and number of colors you chose require more memory than HyperStudio currently has.
You can either reduce the card size and number of colors,
or change the amount of memory available to HyperStudio from the Finder.
\^OK
64The button you are copying contains a commercial NBA.
While you can use it in this stack, if you paste the button into another stack the NBA will not be copied.\^OK
64Your printer port is currently
being used (probably by AppleTalk), so I can't control the LaserDisc player.
Please make sure the printer port is available and restart HyperStudio.\^OK
04Sorry, the serial port selected for the laserdisc player is in use. Please unuse it and restart HyperStudio.\^OK
04Sorry, you can't save this file over an existing stack. Please give the file a new name or save it in a different folder.\^OK
